Lexmark C520, C524, C522 manual Printing only black text and graphics, Handle

Printing

2Open the upper door fully. Grasp the handle on the inner door and pull to open both the inner and lower doors. Gently lower the lower door. Now the photoconductor units can be seen.

3Grasp the knob on the right side of the photoconductor unit, lift up on the knob to release the photoconductor unit, and then lift the photoconductor unit by the handle.

The illustration on the left shows in detail how to remove one of the units, but as the illustration on the right shows, all three color photoconductor units must be removed.

Handle

4Use the packaging (which is a cover sheet and a bag that came on replacement photoconductor units) to cover them. If these items were not saved from the original packaging, wrap a sheet of paper around each unit and seal the sheet with tape, but do not attach the tape to the shiny photoconductor drum.

1 2

Printing only black text and graphics

31