Lexmark C520, C524 Macintosh, Installing drivers for local printing Installing a printer driver

Models: C520 C524 C522

1 145
Download 145 pages 38.39 Kb
Page 13
Image 13

Installing drivers for local printing

Installing a printer driver

A printer driver must be installed on the computer that is connected to the printer.

Note: Windows 95 and Windows 98 (first edition) users should follow the installation directions in Using Windows 95 and Windows 98 (first edition).

1Insert the drivers CD. It should launch automatically. If the CD does not launch automatically, click Start à Run, and type the following in the Run dialog:

D:/Setup.exe

Where D is the letter of the CD-ROM drive.

2Click Install Printer and Software.

3Click Agree to accept the Printer Software License Agreement.

4Select Custom, and click Next.

5Select Components, and click Next.

6Select Local, and click Next.

7Select the printer from the list, and click Add Printer.

8Expand the printer item listed below Selected Components.

9Click PORT: <LPT1>, and select the communications port (COM1 or COM2) needed for use.

10Click Finish to complete the printer software installation.

Setting parameters in the communications (COM) port

After the printer driver is installed, the serial parameters must be set for the communications port assigned to the printer driver.

The serial parameters in the communications port must match exactly to the serial parameters set in the printer.

1Click Start à Settings à Control Panel, and double-clickSystem.

2On the Device Manager tab, click + to expand the list of available ports.

3Select the communications port assigned to the printer (COM1 or COM2).

4Click Properties.

5On the Port Settings tab, set the serial parameters to the exact same serial parameters in the printer.

Look for the printer settings under the Serial Standard (or Serial Option X) heading on the Menu Settings page printed previously.

6Click OK, and close all the windows.

7Print a test page to verify printer installation. a Click Start à Settings à Printers.

b Select the printer just added. c Click File à Properties.

d Click Print Test Page. When a test page prints successfully, printer setup is complete.

Macintosh

Mac OS 9.x or later is required for USB printing. To print locally to a USB-attached printer, create a desktop printer icon (Mac OS 9) or create a queue in Print Center / Printer Setup Utility (Mac OS X).

Macintosh

13

Page 13
Image 13
Lexmark C520 Macintosh, Installing drivers for local printing Installing a printer driver, D/Setup.exe, Click Properties