Lexmark C522, C524, C520 manual Installing an optional hard disk, Installing and removing options

Installing and removing options

Installing an optional hard disk

Note: A small Phillips screwdriver is needed to attach the hard disk to the mounting plate.

Warning: Hard disks are easily damaged by static electricity. Touch something metal on the printer before touching a disk.

Note: If an option card has been installed, it may need removing before installing the hard disk.

1Remove the system board metal plate (see Accessing the system board).

2Remove the mounting plate, hard disk, ribbon cable, and attachment screws from the package.

3Align the ribbon cable connector with the connector pins on the hard disk.

4Attach the ribbon cable to the hard disk.

5Align the screw holes on the mounting plate with the holes in the hard disk.

6Secure the mounting plate to the hard disk with the screws.

Installing an optional hard disk

128