ASSEMBLY INSTRUCTIONS
Please Read Operating Instructions Carefully Before Using the Heritage™ Desk Lamp:
1.Set lamp base on the desk and insert the counter weight arm (F) onto the center swivel (E) and screw clockwise to tighten. (Fig.1)
2.To lift lamp head, loosen swivel knob (C), adjust head to desired angle. Tighten swivel knob.
3.Attaching the Optix® glare control filter:
•Remove glare control filter from protective plastic bag. Take care to hold filter by the edges only.
•Insert tabs on bottom of filter into opening. (Fig. 2)
•Press into place using thumb tab.
Do not touch or press on the filter material itself.
C
E
F
Fig. 1
Note: Do not touch material
Fig. 2
5
