Verilux VF03 manual Troubleshooting

TROUBLESHOOTING

Your Verilux® desk lamp uses advanced micro-electronics to power the revolutionary Trucolite™ bulb. These electronics are housed in a specially designed ballast located at the power plug. The LED indicator light on the ballast allows you to troubleshoot any problems with the lamp’s function. When replacing your Verilux® ballast, take care to plug in the power cord properly. The 4-pin plug was designed to fit in only one orientation (See Assembly Instructions on page 5).

•Make sure all power connectors, cords, and plugs are inserted fully and securely.

•Be sure the bulb is securely seated into the socket. (See page 8).

•Unplug the lamp for a few minutes (this allows the electronics in the ballast to reset).

•Make sure there is power to the wall outlet or try another outlet.

WARNING: Do not block vents on ballast. Vents are necessary for proper function of the ballast; blocking them may cause overheating of the ballast and increase risk of fire.

9