Safety, Regulatory & Legal

Battery Use & Safety

The following battery use and safety information applies to all Motorola mobile devices. If your mobile device uses a non-removable main battery (as stated in your product information), details related to handling and replacing your battery should be disregarded—the battery should only be replaced by a Motorola-approved service facility, and any attempt to remove or replace your battery, unless performed by a service representative, may damage the product and void your warranty.

Important: Handle and store batteries properly to avoid injury or damage. Most battery safety issues arise from improper handling of batteries, and particularly from the continued use of damaged batteries.

DON’Ts

Don’t disassemble, crush, puncture, shred, or otherwise attempt to change the form of your battery.

Don’t use tools, sharp objects, or excessive force to insert or remove the battery as this can damage the battery.

Don’t let the mobile device or battery come in contact with liquids.* Liquids can get into the mobile device’s circuits, leading to corrosion.

Don’t allow the battery to touch metal objects. If metal objects, such as jewelry, stay in prolonged contact with the battery contact points, the battery could become very hot.

Don’t place your mobile device or battery near a heat source.* High temperatures can cause the battery to swell, leak, or malfunction.

Don’t dry a wet or damp battery with an appliance or heat source, such as a hair

dryer or microwave oven.

DOs

Do avoid leaving your mobile device in your car in high temperatures.*

Do avoid dropping the mobile device or battery.* Dropping these items, especially on a hard surface, can potentially cause damage.*

Do contact your service provider or Motorola if your mobile device or battery has

been damaged in any of the ways listed here.

*Note: Always make sure that any battery, connector and compartment covers are closed and secure to avoid direct exposure of the battery to any of these conditions, even if your product information states that your mobile device can resist damage from these conditions.

Important: Motorola recommends you always use Motorola-branded batteries and chargers for quality assurance and safeguards. Motorola’s warranty does not cover damage to the mobile device caused by non-Motorola batteries and/or chargers. To help you identify authentic Motorola batteries from non-original or counterfeit batteries (that may not have adequate safety protection), Motorola provides holograms on its batteries. You should

confirm that any battery you purchase has a “Motorola Original” hologram.

If you see a message on your display such as Invalid Battery or Unable to Charge, take the following steps:

Remove the battery and inspect it to confirm that it has a “Motorola Original” hologram;

If there is no hologram, the battery is not a Motorola battery;

If there is a hologram, replace the battery and try charging it again;

If the message remains, contact a Motorola authorized service center.

Warning: Use of a non-Motorola battery or charger may present a risk of fire, explosion, leakage, or other hazard.

Proper and safe battery disposal and recycling: Proper battery disposal is not only

important for safety, it benefits the environment. You can recycle your used batteries in many

retail or service provider locations. Additional information on proper disposal and recycling can

be found at www.motorola.com/recycling

 

Disposal: Promptly dispose of used batteries in accordance with local regulations.

 

Contact your local recycling center or national recycling organizations for more

032375o

information on how to dispose of batteries.

 

Warning: Never dispose of batteries in a fire because they may explode.

Battery Charging

Notes for charging your product’s battery:

During charging, keep your battery and charger near room temperature for efficient battery charging.

New batteries are not fully charged.

New batteries or batteries stored for a long time may take more time to charge.

Motorola batteries and charging systems have circuitry that protects the battery from damage from overcharging.

Troubleshooting 65

Page 67
Image 67
Verizon DROID RAZR MAXX, XT912M Battery Use & Safety, Battery Charging, Been damaged in any of the ways listed here

XT912M, DROID RAZR, DROID RAZR MAXX, XT912 specifications

Motorola XT912, also known as the DROID RAZR, and its enhanced variant, the DROID RAZR MAXX, are iconic smartphones that played a significant role in the evolution of mobile technology. Launched in late 2011, the XT912 quickly caught the attention of consumers due to its ultra-slim design, which boasted a thickness of just 7.1 mm, making it one of the thinnest smartphones on the market at that time.

One of the standout features of the DROID RAZR was its use of Kevlar material on the back cover, giving it a distinct look while providing added durability. The device also featured Corning Gorilla Glass on the front, enhancing its resistance to scratches and cracks. This combination of materials made the DROID RAZR not just a stylish phone but also a robust one built to withstand the rigors of daily use.

The display was another highlight, sporting a 4.3-inch Super AMOLED advanced display with a resolution of 540 x 960 pixels. This made for vibrant colors and excellent contrast ratios, perfect for multimedia consumption and gaming. Under the hood, the XT912 was powered by a dual-core processor, coupled with 1 GB of RAM, ensuring smooth performance for multitasking and running applications.

In terms of photography, the DROID RAZR came with an 8-megapixel rear camera capable of 1080p video recording, alongside a VGA front-facing camera. This setup catered to users who sought quality images and videos. The device's internal storage started at 16 GB and could be expanded via microSD, allowing users to store ample content.

The DROID RAZR MAXX built on these strengths with an impressive 3,300 mAh battery, significantly enhancing battery life compared to the original model. Users could enjoy extended talk time and media consumption without the constant worry of finding a charger.

The Motorola XT912M, primarily targeted at the Canadian market, shared many of the same features as its predecessors but included specific enhancements to cater to local carrier requirements.

All models ran on Android, providing a customizable and user-friendly interface supported by a wealth of applications available through the Google Play Store. With these qualities, the Motorola XT912, DROID RAZR, DROID RAZR MAXX, and XT912M remain memorable devices in the annals of smartphone history, symbolizing the sleek, powerful designs that continue to influence modern smartphones today.