Verizon XT1080 manual Start, Assemble & charge battery

Start

Assemble & charge battery

Your SIM card is pre-installed in your smartphone. If you need to replace your SIM, pull the volume keys/SIM tray out of the smartphone as shown in step 1. Otherwise, just charge up and turn on.

1

Pull out the volume	Clip the SIM card	Push the tray
keys/SIM tray with	into the tray.	back into your
your fingernail.		smartphone.

2	3
Charge fully.	Turn on.

3 H

Power

Key

Caution: Before using your smartphone, please read the safety, regulatory, and legal information provided with your product.

Tips & tricks

•SIM tray: The SIM tray is integrated with the volume keys. To remove the SIM tray, slide your fingernail under the volume keys on the side of your smartphone and pull out.

•Power/Sleep key: To make the screen sleep or wake up, press the Power key. To turn your smartphone on or off, press and hold the Power key.

•Low Battery LED: The LED lights up when the battery is too low to power on your smartphone. Connect the charger and let the battery charge for a few minutes before you try to power on.

•Battery: Squeeze every bit of juice out of your battery. See “Battery life” on page 5.

Warning: Don't try to remove or replace the battery yourself—doing so may damage the battery and could cause burning and injury. If your smartphone becomes unresponsive, try a reboot—press and hold both the Power and the Volume Up keys for about 15 seconds.

4Start