Warranty

Limited 3 Year Warranty

CFM Corporation warrants that this woodburning stove will be free of de- fects in material and workmanship for a period of three years from the date you receive it, except that the catalyst, thermostat assembly, handles, glass door panels, cement, and gasketing shall be warranted as described below.

CFM Corporation will repair or replace, at its option, any part found to be defective upon inspection by a Vermont Castings, Authorized Dealer. The customer must return the defective part or the stove, with shipping prepaid, to the Authorized Dealer or pay for any Authorized Dealer in-home travel fees or service charges for in-home repair work. It is the dealer’s option whether the repair work will be done in the cus- tomer’s home or in the dealer’s shop. If, upon inspection, the damage is found to be the fault of the manufacturer, repairs will be authorized at no charge to the customer for parts and/or labor.

Any woodburning stove or part thereof that is repaired or replaced dur- ing the limited warranty period will be warranted under the terms of the limited warranty for a period not to exceed the remaining term of the original limited warranty or six (6) months, whichever is longer.

Limited 1 Year Warranty

The following parts of the woodburning stove are warranted to be free of defects in material and workmanship for a period of one year from the date you receive it: The thermostat assembly, handles, glass door panels, cement, and gasketing. Any of these items found to be defec- tive will be repaired or replaced at no charge, upon the return of the part with postage prepaid to a Vermont Castings Authorized Dealer.

Any part repaired or replaced during the limited warranty period will be warranted under the terms of the limited warranty for a period not to exceed the remaining term of the original limited warranty or six (6) months, whichever is longer.

Limited Catalyst Warranty

The catalyst will be warranted for a six year period as follows: If the original catalyst or a replacement catalyst proves defective or ceases to maintain 70% of its particulate emission reduction activity (as measured by an approved testing procedure) within 24 months from the date the stove is received, the catalyst itself will be replaced free.

From 25 - 72 months a pro-rated credit will be allowed against a re- placement catalyst and the cost of labor necessary for its installation at the time of replacement.

For stove purchases made after June 30, 1990, a third year

(25 - 36 months) of no charge replacement will be made when combus- tor failure is due to thermal degradation of the substrate (crumbling of ceramic material). The customer must pay for any in-home travel fees, service charges, or transportation costs for returning the stove to the Authorized Dealer.

Amount of Time

Credit Towards

Since Purchase

Replacement Cost

0 - 24 months

100%

25 - 36 months

50 %

37 - 48 months

30%

49 - 60 months

20%

61 - 72 months

10%

Any replacement catalyst will be warranted under the terms of the catalyst warranty for the remaining term of the original warranty. The purchaser must provide the following information in order to receive a replacement catalyst under the terms of this limited warranty:

1.Name, address and telephone number.

2.Proof of original purchase date.

3.Date of failure of catalyst.

4.Any relevant information or circumstances regarding determina- tion of failure.

5.In addition, the owner must return the failed catalyst.

Exclusions & Limitations

1.This warranty is transferable; however, proof of original retail pur- chase is required.

2.This warranty does not cover misuse of the stove. Misuse includes overfiring which will result if the stove is used in such a manner as to cause one or more of the plates to glow red. Overfiring can be identified later by warped plates and areas where the paint pigment has burned off. Overfiring in enamel fireplaces is identified by bub- bling, cracking, chipping and discoloration of the porcelain enamel finish. CFM Corporation offers no warranty on chipping of enamel surfaces. Inspect your woodburning stove prior to accepting it for any damage to the enamel.

3.This warranty does not cover misuse of the stove as described in the Owner’s Guide, nor does it cover an stove which has been modified unless authorized by a CFM Corporation representative in writing. This warranty does not cover damage to the stove caused by burning salt saturated wood, chemically treated wood, or any fuel not recommended in the Owner’s Guide.

4.This warranty does not cover a stove repaired by someone other than a Vermont Castings Authorized Dealer.

5.Damage to the unit while in transit is not covered by this warranty but is subject to a claim against the common carrier. Contact Vermont Castings Authorized Dealer from whom you purchased your stove or CFM Corporation if the purchase was direct. (Do not operate the stove as this may negate the ability to process the claim with the carrier.)

6.Claims are not valid where the installation does not conform to local building and fire codes or, in their absence, to the recommendations in our Owner’s Guide.

7.The salt air environment of coastal areas, or a high-humidity en- vironment, can be corrosive to the porcelain enamel finish. These conditions can cause rusting of the cast iron beneath the porcelain enamel finish, which will cause the porcelain enamel finish to flake off. This warranty does not cover damage caused by a salt air or high-humidity environment.

8.CFM Corporation shall have no obligation to enhance or update any unit once manufactured.

IN NO EVENT SHALL CFM CORPORATION BE LIABLE FOR INCI- DENTAL AND CONSEQUENTIAL DAMAGES. ALL IMPLIED WAR- RANTIES, INCLUDING THE IMPLIED WARRANTIES OF MERCHANT- ABILITY AND FITNESS, ARE LIMITED TO THE DURATION OF THIS WRITTEN WARRANTY. THIS WARRANTY SUPERCEDES ALL OTHER ORAL OR WRITTEN WARRANTIES.

Some states do not allow the exclusion or limitations of incidential and consequential damages or limitations on how long an implied warranty lasts, so the above limitations may not apply to you. This warranty gives you specific rights and you may have other rights which vary from state to state.

How to Obtain Service

If a defect is noted within the warranty period, the customer should contact a Vermont Castings Authorized Dealer or CFM Corporation if the purchase was direct with the following information:

1.Name, address, and telephone number of the purchaser.

2.Date of purchase.

3.Serial number from the label on the back.

4.Nature of the defect or damage.

5.Any relevant information or circumstances, e.g., installation, mode of operation when defect was noted.

A warranty claim will then start in process. CFM Corporation reserves the right to withhold final approval of a warranty claim pending a visual inspection of the defect by authorized representatives.

30003840

31

Page 31
Image 31
Vermont Casting 1990CE installation instructions Warranty

1990CE specifications

The Vermont Casting 1990CE is a remarkable wood-burning stove that has earned a solid reputation for its innovative design, efficiency, and durability. Renowned for its classic aesthetics and modern functionality, the 1990CE combines traditional craftsmanship with cutting-edge technology, making it a favorite among homeowners looking to enhance their living spaces with both warmth and style.

One of the most notable features of the 1990CE is its exceptional efficiency. The stove is designed to produce a high heat output while minimizing the consumption of wood. With an impressive efficiency rating, it effectively uses the fuel, ensuring that users enjoy longer burn times and reduced firewood usage. This efficiency not only provides warmth but also aligns with eco-friendly practices, reducing the impact on the environment.

The Vermont Casting 1990CE incorporates advanced secondary combustion technology, which allows for a cleaner burn and significantly lowers emissions. This state-of-the-art system ensures that the stove generates less smoke and reduces the amount of pollutants released into the atmosphere. As a result, users can enjoy the benefits of a cozy fire without the guilt of environmental harm.

In addition to its environmental features, the stove is built with a heavy cast iron construction, which ensures durability and longevity. The cast iron design not only provides excellent heat retention but also adds a timeless aesthetic to any home. The 1990CE is available in various finishes, allowing homeowners to select a style that complements their decor.

Another key characteristic of the Vermont Casting 1990CE is its user-friendly design. The stove features an easy-to-use air control system that allows users to adjust the intensity of the fire with ease. This precise control enables the creation of the desired ambiance, whether for a cozy evening or a more intense heating requirement.

Furthermore, the 1990CE offers a large viewing window, framed by a stylish cast iron design, allowing users to enjoy the mesmerizing flames while enhancing the overall visual appeal of the room. The stove’s clean lines and classic design make it a versatile addition to various interior styles, from rustic to contemporary.

Ultimately, the Vermont Casting 1990CE stands out for its combination of efficiency, aesthetic appeal, and user-friendly features. With its commitment to sustainable burning practices and craftsmanship, it provides an ideal solution for those seeking both warmth and style in their homes. Whether for practical heating or the simple joy of a crackling fire, the 1990CE is a remarkable choice that will serve homeowners well for years to come.