Manuals / Vermont Casting / Household Appliance / Stove

Vermont Casting 4322 installation instructions Contents, Tools Required, Installation Precautions

Models: 4322

1 4
Download 4 pages 13.34 Kb
Page 1
Image 1

Gasket Kit #4322

Installation Instructions

for use on the Defiant Stove

Vermont Castings’ stoves use a rope-type gasket to make a seal between some parts. With use, this gasket can become compressed and begin to lose its effective- ness. It should then be replaced.

This kit includes materials to re-gasket a Model #1910 or #1945 Defiant stove. This stove model has glass panels in the front doors. This kit is not appropriate for the 1975-1988 model Defiant stoves which do not have glass panels in the front doors.

Contents

•3.5’ of 5/16” Glass Fiber Gasket for the damper

•7’ of 3/16” Glass Fiber Gasket (Glass)

•4¹⁄₂’ of 5/16” Wire Reinforced Glass Fiber “Armaseal” for the griddle

•10.9’ of 3/8” Glass Fiber Gasket for the ash door and main doors

•3 oz. Tube of Gasket Cement

Tools Required

Phillips screwdriver Utility knife or scissors Wire brush

Small cold chisel

Rubber mallet, or hammer and wood block

Flashlight or droplight

Installation Precautions

Be sure the fire is out and the stove has cooled before replacing the gasket, and be sure to follow the standard safety procedure for working with dusty materials: Wear safety goggles and a dust mask.

Installation Instructions

Gaskets provide a tight seal between moving parts. Eventually these gaskets will become compressed and will no longer seal properly. Replacing the gaskets will improve performance. For a guide to each gasketed area, refer to the following sections and illustrations.

Regardless of its location, replacing a gasket involves these steps:

1.Remove the existing gasket by scraping it out of its channel with an old screwdriver.

2.Clean the gasketing channel with a wire brush. Be careful with adjacent surfaces, especially if they are enamelled. Remove any stubborn deposits with a small cold chisel. Clean both mating surfaces thor- oughly to bare metal.

3.Cut the appropriate size gasket to length, allowing an extra inch.

4.Knead the tube of cement before opening, to mix the contents thoroughly.

5.Place an unbroken 1/8” bead of gasket cement in the channel. Do not use too much cement as it may saturate the gasket; the gasket must remain soft and resilient. One tube of cement will produce a 1/8” bead sufficient for all the gasket in this kit.

6.Starting with one end, press the gasket into the cemented channel. If the gasket goes around and meets itself, ensure that you have a good joint be- fore trimming the excess gasket. Do not overlap or leave ragged edges.

7.Seat the gasket by placing it firmly against its normal mating surface. A slip of waxed paper between the gasket and its mating surface will help keep the ce- ment from traveling through the gasket and sticking to the mating surface. Clean away any excess ce- ment.

8.With enamel stoves, be careful to keep cement off the enamel finish. If cement does accidentally get on the enamel, wash it off immediately with warm water.

9.Allow to dry. Be sure to remove the waxed paper!

10.If you have questions, refer to the Defiant Owner’s Manual, or a Vermont Castings Dealer.

Griddle

Remove the griddle. Pull off the old gasket and clean the channel with the wire brush. Set the steel reinforced 5/16” gasket in the griddle channel and mark the cor- rect length. Place the gasket on a wood cutting surface and trim with a utility knife or scissors. Twist the ends slightly to prevent unraveling. Place a continuous 1/8” bead of gasket cement in the channel and press the gasket into place. Replace the griddle and compress against the gasket by striking around the edges with the rubber mallet or hammer and block of wood. Do not strike the stove top.

2003144 8/08 Rev. 6

Page 2
Page 1
Image 1
Vermont Casting 4322 installation instructions Contents, Tools Required, Installation Precautions, Griddle
Page 2

4322 specifications

The Vermont Casting 4322 is a popular and sophisticated cast iron gas stove that brings the perfect blend of functionality, aesthetics, and efficiency to any home. Designed with both traditional and contemporary styles in mind, this stove stands out for its impressive features and advanced technologies.

One of the main characteristics of the Vermont Casting 4322 is its construction. Made from high-quality cast iron, the stove ensures durability and long-lasting performance while adding a classic touch to your living space. The thick cast iron walls provide excellent heat retention, allowing the stove to radiate warmth even after the flame has gone out, making it an ideal choice for those looking to save on heating costs.

In terms of performance, the Vermont Casting 4322 boasts a powerful heating capacity, making it suitable for larger areas. The efficient design enables the stove to deliver a substantial amount of heat while consuming less fuel, thus reducing emissions. Many users appreciate the ability to regulate not just the heat output but also the flame size with its adjustable gas valve, providing customized comfort levels to suit individual preferences.

The stove features a ceramic fiber combustion chamber, which aids in maximized heat production and efficiency. This technology works to capture and re-burn gases, resulting in cleaner emissions and improved combustion. An additional benefit of the Vermont Casting 4322 is its easy-to-use electronic ignition system, which ensures reliable starts, even in colder weather.

Another appealing aspect is the large viewing window, framed by elegant cast iron, which allows users to enjoy the beauty of the flame. The use of a high-temperature glass provides a clear view while remaining safe and efficient. The stove also provides users with a variety of aesthetic options, including different color finishes and decorative door designs, enabling homeowners to select a unit that perfectly complements their decor.

Furthermore, the Vermont Casting 4322 adheres to strict environmental standards, making it compliant with various regional emissions regulations. This facet not only underscores the brand's commitment to sustainability but also allows users to enjoy their stove with peace of mind.

In summary, the Vermont Casting 4322 is a versatile gas stove that combines traditional craftsmanship with modern efficiency technologies. With its robust construction, customizable features, and aesthetic options, it stands out as an excellent choice for homeowners seeking both beauty and functionality in their heating solutions.