MENU MODE

The Menu system of the FT-2000provides extensive customization capability, so you can set up your transceiver just the way you want to operate it. The Menu items are grouped by general utilization category, and are numbered from “001 AGc FST DLY” to “147 tGEn EMRGNCY.”

USING THE MENU

1.Press the [MENU] button momentarily, to engage the Menu mode.

The Main (VFO-A) frequency display will show the Menu Number and Menu Group name, while the Sub (VFO-B) frequency display will show the Menu item; the Multi-Display window shows the current setting of the currently-selected Menu item.

2.Rotate the Main Tuning Dial knob to select the Menu item you wish to work on.

3.Rotate the [SUB VFO-B] knob to change the current setting of the selected Menu item.

4.When you have finished making your adjustments, press and hold in the [MENU] button for two seconds to save the new setting and exit to normal operation. If you only momentarily press the [MENU] button, the new settings will not be retained.

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

[MENU] Button

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Main Tuning Dial Knob

[SUB VFO-B] Knob

Menu Number

Menu Group Name

Menu Item

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Menu Setting

Menu Mode Reset

You may reset all the Menu settings to their original factory defaults, if desired.

1.Turn the front panel [POWER] switch off.

2.Press and hold in the [MENU] button, and while holding it in, press the [POWER] switch to turn the transceiver back on. Now release the [MENU] button.

Page 108

FT-2000 OPERATING MANUAL