MENU MODE
DISPLAY GROUP
014 diSP QMB MKR
Function: Enables/Disables the QMB Marker (White arrow “”) to display on the Spectrum Band Scope when the optional
Available Values: On/OFF
Default Setting: On
ADVICE:
If the optional
DVS GROUP
015 dUS RX LVL
Function: Sets the audio output level from the voice memory.
Available Values: 0 ~ 100
Default: 50
016 dUS TX LVL
Function: Sets the microphone input level to the voice memory
Available Values: 0 ~ 100
Default: 50
KEYER GROUP
017 tEy BEACON
Function: Sets the interval time between repeats of the beacon message.
Available Values: OFF/1 ~ 255 sec
Default Setting: OFF
018 tEy NUM STL
Function: Selects the Contest Number “Cut” format for an imbedded contest number.
Available Values: 1290/AunO/Aunt/A2nO/A2nt/12nO/ 12nt
Default Setting: 1290
1290: Does not abbreviate the Contest Number AunO:Abbreviates to “A” for “One,” “U” for “Two,”
“N” for “Nine,” and “O” for “Zero.”
Aunt: Abbreviates to “A” for “One,” “U” for “Two,” “N” for “Nine,” and “T” for “Zero.” A2nO:Abbreviates to “A” for “One,” “N” for “Nine,”
and “O” for “Zero.”
A2nt: Abbreviates to “A” for “One,” “N” for “Nine,” and “T” for “Zero.”
12nO: Abbreviates to “N” for “Nine,” and “O” for “Zero.”
12nt: Abbreviates to “N” for “Nine,” and “T” for “Zero.”
019 tEy CONTEST
Function: Enters the initial contest number that will in- crement/decrement after sending during contest QSOs. Available Values: 1 ~ 9999
Default Setting: 1
ADVICE:
Press the [CLEAR] button to reset the contest number to “1.”
020 tEy CW MEM1
Function: Permits entry of the CW message for message register 1.
Available Values: tyP1/tyP2
Default Setting: tyP2
tyP1: You may enter the CW message from the front panel’s Function Keys.
tyP2: You may enter the CW message from the CW keyer.
021 tEy CW MEM2
Function: Permits entry of the CW message for message register 2.
Available Values: tyP1/tyP2
Default Setting: tyP2
tyP1: You may enter the CW message from the front panel’s Function Keys.
tyP2: You may enter the CW message from the CW keyer.
Page 113 |