MENU MODE
072 F3E MICGAIN
Function: Sets the microphone gain for the FM mode.
Available Values: Ur/0 ~ 100
Default Setting: 50
When this menu is set to “Ur,” you may adjust the microphone gain using the front panel’s [MIC] knob.
073 F3E MIC SEL
Function: Selects the microphone to be used on the FM mode.
Available Values: Frnt/dAtA/PC
Default Setting: Frnt
Frnt (FRONT): Selects the microphone connected to
| the front panel’s MIC jack while us- |
| ing the FM mode. |
dAtA: | Selects the microphone connected to |
| pin 1 of the PACKET Jack while us- |
| ing the FM mode. |
PC: | This parameter is for future expansion |
| of this transceiver’s capabilities, but |
| at this time is not supported. |
074 F3E 28 RPT
Function: Sets the magnitude of the repeater shift on the 28 MHz band.
Available Values: 0 ~ 1000 kHz (10 kHz/step)
Default Setting: 100 kHz
075 F3E 50 RPT
Function: Sets the magnitude of the repeater shift on the 50 MHz band.
Available Values: 0 ~ 4000 kHz (10 kHz/step)
Default Setting: 1000 kHz
076 rtty R PLRTY
Function: Selects normal or reverse Mark/Space polarity for RTTY receive operation.
Available Values: nor/rEU
Default Setting: nor
077 rtty T PLRTY
Function: Selects normal or reverse Mark/Space polarity for RTTY transmit operation.
Available Values: nor/rEU
Default Setting: nor
078 rtty RTY OUT
Function: Selects the receiver to be connected to the data output port (pin 1) of the RTTY jack.
Available Values: nAin (Main)/Sub (Sub)
Default Setting: nAin (Main)
079 rtty OUT LEL
Function: Sets the FSK RTTY data output level at the output port (pin 1) of the RTTY jack.
Available Values: 0 ~ 100
Default Setting: 50
080 rtty SHIFT
Function: Selects the frequency shift for FSK RTTY op- eration.
Available Values:170/200/425/850 Hz
Default Setting: 170 Hz
081 rtty TONE
Function: Selects the Mark tone for RTTY operation.
Available Values: 1275/2125 Hz
Default Setting: 2125 Hz
Page 119 |