CW CONVENIENCE FEATURES

CONTEST MEMORY KEYER (USING THE OPTIONAL FH-2 REMOTE CONTROL KEYPAD)

6.When the message is complete, add the “}” character at the end to signify the termination of the message.

7.Press and hold in the FH-2’s [MEM] key for 2 sec- onds to exit, once all characters (including “}”) have been programmed.

CHECKING THE CW MEMORY CONTENTS

1.Be sure that Break-in is still turned Off.

2.Press the [MONI] button to enable CW monitor.

3.Press the FH-2’s [1] ~ [5] key to check your work. You will hear the results in the sidetone, but no RF energy will be transmitted.

LOCK

ON OFF

LOCK

ON OFF

ADVICE:

Deleting Previously-stored Characters

Use the FH-2’s [￿] and [￿] keys or Main Tuning Dial knob to select the last correct letter in the message. Now use the [￿] and [￿] keys or [SUB VFO-B] knob to select the “}” character; everything after the “}” character will be deleted.

NOTE:

You may adjust the monitor level using the [MONI] knob.

ON-THE-AIR CW MESSAGE PLAYBACK

1.Press the [BK-IN] button to enable transmission. Ei- ther Full- or Semi-break-in will be engaged, depend- ing on the setting of Menu item “058 A1A BK-IN.”

2.Press the FH-2’s [1] ~ [5] key to transmit the pro- grammed message.

LOCK

ON OFF

NOTE:

Decrementing the Contest Number

By pressing the FH-2’s [DEC] key momentarily, you may reduce the current Contest Number by one.

If you subsequently decide to use the “Message Memory” technique for memory storage, please note that the contents of a message stored using text input will not be transferred over when you select “Message Memory technique” on a particular memory register (the Menu Mode Setting is set to “tyP2”).

LOCK

ON OFF

FT-2000 OPERATING MANUAL

Page 91