Page 31Phantom PS1000

11.2 DSC SCAN

When the radio is shipped from the factory it is programmed so CH70 (the DSC
channel) is scanned at all times. There is a selection in the SETUP MENU to
disable the DSC SCAN. However, turning off DSC SCAN will disable the radio
from receiving DSC calls i.e.: Individual Call, All Ships Call, Distress Call and
Position Requests. If you want to use any of the functions the selection must be
left ON.
To Change DSC SCAN Method:
1. Press and hold down the [CALL(SET)MENU] key
until “RADIO SETUP” menu appears.
2. Press the [CALL(SET)MENU] key, then press the
[] key to select “DSC SCAN” menu.
3. Press the [CALL(SET)MENU] key.
4. Press the [] or [] key to select “on” or “of (off).”
5. Press the [CALL(SET)MENU] key to store the se-
lected setting.
6. To exit this menu and return to radio operation mode press
the [16/9] key.