Vertex Standard PS1000 - page 38

Phantom PS1000Page 38
3: 15 times
2: 10 times
1: 5 times
5. Press the [CALL(SET)MENU]key to store the selected setting.
6. To exit this menu and return to radio operation mode press the [16/9] key.
The Phantom PS1000 has the capability to turn off the Individual or Group call
ringer.
1. Press and hold down the [CALL(SET)MENU] key
until “RADIO SETUP” menu appears.
2. Press the [] key to select “DSC SETUP” menu,
then press the [CALL(SET)MENU] key.
3. Press the [] or [] key to select “DSC BEEP” menu,
then press the [CALL(SET)MENU] key.
4. Press the [] or [] key to select “INDIVIDUAL” if
you wish to disable the Individual call ringer, or
“GROUP” if you wish to disable the Group call ringer,
then press the [CALL(SET)MENU] key.
5. Press the [] or [] key to select “oF.”
6. Press the [CALL(SET)MENU] key to store the se-
lected setting.
7. To exit this menu and return to radio operation mode press the [16/9] key.
If you wish to return to enabling the ringer tone, just repeat the above proce-
dure, pressing the [] or [] key to select “on” in step “5” above.
11.6.4 Transmitting an Individual Call
This feature allows the user to contact another vessel with a DSC radio. This
feature is similar to calling a vessel on CH16 and requesting to go to another
channel.
1. Press the [CALL(SET)MENU] key. The DSC Op-
eration menu will appear.
2. Press the [] or [] key to select “INDIVIDUAL”
menu, then press the [CALL(SET)MENU] key. The
transceiver will beep, and the “Individual directory”
will appear. (To cancel, press the [16/9] key)
3. Press the [] or [] key to select the “Individual”
you want to contact.
4. Press the [CALL(SET)MENU] key to transmit the
individual DSC signal.
5. After INDIVIDUAL CALL is transmitted, the trans-
ceiver will wait 8 seconds for the acknowledgment.