VM-3500EPage 38
7. Press the [ENT] key to store the first letter in the name and step to the next
letter to the right.
8. Repeat step 6 and 7 until the name is complete. The name can consist of
up to eleven characters, if you do not use all eleven
characters press the [ENT] key to move to the next
space. This method can also be used to enter a blank
space in the name. To clear the previous letter, press
the [CLR] key.
9. After the eleventh letter or space has been entered, press the [ENT] key to
advance to the MMSI (Maritime Mobile Service Identity Number) number
entry.
10. Enter the MMSI number by the keypad. If a mistake
was made entering in the number, pressing the [CLR]
key to delete the wrong character.
11. To store the data entered, press and hold the [ENT]
key.
12. To enter another individual address, repeat steps 4 through 12.
13. To exit this menu and return to radio operation mode press the [16/9] key.
NOTE
Selecting “Next” or “Exit” will automatically save the name and MMSI
number into memory.
9.5.2 Setting up the Individual Call Ringer
When a Individual call is received the radio will produce a ringing tone for 3
minutes. This selection allows the Individual Call ringer time to be changed.
1. Press and hold down the [CALL(MENU)] key until
“Radio Setup” menu appear.
2. Turn the CHANNEL selector knob to select “DSC
Setup” menu.
3. Press the [ENT] key, then select “INDIV Ring” with
the CHANNEL selector knob.
4. Press the [ENT] key.
5. Turn the CHANNEL selector knob to select ringing
time of a Individual Call.
6. Press the [ENT] key to store the selected setting.
7. To exit this menu and return to radio operation mode
press the [16/9] key.