VX-2200 SERIES OPERATING MANUAL 9
ADVANCED OPERATION
programmable key for one second to delete the Current Memory channel from the
Scanning. When you delete a Group or channel, “-SCAN Skip-” will appear on the
LCD for one second after pressing the assigned programmable key. To restore a
particular channel to your scanning list, press and hold in the assigned programmable
key again for one second; “-SCAN Stop-” will appear on the LCD for one second
after pressing the assigned programmable key.
CHANNEL SCAN (SCAN)
The Scanning feature is used to monitor multiple channels programmed into the trans-
ceiver. While scanning, the transceiver will check each channel for the presence of a
signal, and will stop on a channel if a signal is present.
To activate scanning:
Press (or press and hold) the assigned programmable key to activate scanning on
the current group.
The scanner will search the programmed channels, looking for active ones; it
will pause each time it finds a channel on which someone is speaking.
Press (or press and hold)the assigned programmable key again to disable scan-
ning. Operation will revert to the programmed revert channel or activate the
Group scanning when Multi-Group Scanning is enabled.
Note: Your dealer may have programmed your radio to stay on one of the follow-
ing channels if you press the PTT switch during the scanning pause:
Current channel (“Talk Back”)
“Last Busy” channel
“Priority” channel
“Home” channel
“Scan Start” channel