VX-2200 SERIES OPERATING MANUAL12CALL/RESET
This feature, if enabled, allows the user to change the 3-digit Page Call code, used to
call other similarly-equipped stations. Press (or press and hold) the assigned pro-
grammable key, followed by the three digits representing the Page Call code of the
station you wish to call. Three tones will be heard after the last key is pressed (the
new code will now be transmitted).
The receiver squelch of the other station will be opened, and you can begin commu-
nication.
CALL 1 TO CALL 3
Press (or press and hold) the assigned programmable key to send a 5-Tone sequential
burst which is pre-defined.
CODE UP/DOWN
Press (or press and hold) the assigned programmable key to select a 5-Tone encode
code from pre-defined encode list.
CODE SET
Press (or press and hold) the assigned programmable key to change the 5-Tone
encodeing digit. To change the tones, select the desired digit using the [P1]/[P2]
keys, then change the number using the []/[] keys.
STATUS UP/DOWN
Press (or press and hold) the assigned programmable key to select a 5-Tone status
code from the pre-defined status list.
SPEED DIAL
Your Dealer may have pre-programmed Auto-Dial telephone number memories into
your radio.
To dial a number, press (or press and hold) the assigned programmable key, then
press the microphone’s numbered key corresponding to the Auto-Dial memory num-
ber list provided by your Dealer. The DTMF tones sent during the dialing sequence
will be heard in the speaker.
ADVANCED OPERATION