VXA-710 SPIRIT OPERATING MANUAL
45
Deleting Memories
Press and hold in both the PTT switch and key,
while turning the radio on, to activate the Field Pro-
gramming Mode. “FD” will appear at the upper left
corner on the display.
Press and hold in the key for 2 seconds. The dis-
play will indicate a “Book” memory channel number
will blink on the LCD.
Within five seconds of releasing the key, rotate the
DIAL selector knob to select the memory channel num-
ber you wish to delete.
Press the key momentarily. The previously-se-
lected memory will be deleted.
Turn the radio off, then turn the radio back on again to
begin normal operation.
CPU RESETTING
In some instances of erratic or unpredictable operation,
the cause may be corruption of data in the microproces-
sor (due to static electricity, etc.). If this happens, reset-
ting of the microprocessor may restore normal operation.
Note that all memories will be erased if you do a com-
plete microprocessor reset, as described below.
To clear all memories and other settings to factory de-
faults:
1. Turn the radio off.
2. Press and hold in the key, and the MONITOR
button, while turning the radio on.
FIELD PROGRAMMING MODE