Vertical Communications 480I TFTP Server Settings , SIP settings

When an IP address has been assigned to
the phone, you have the option to either
continue configuring the 480i through
the button on the phone or to
start using the Vertical 480i Web
Client. See the section “The Vertical
480i Web Client” within this guide for
details.
From the Web Client:
1. Click on the Network sub-
category under the ADMIN main
category.
2. Enter the administrator’s user
name and password (the default
user name is “admin” and
password is “22222”).
3. In the web page that has just
opened enter the IP address of
the phone, the Subnet Mask and
the Gateway IP address in their
corresponding fields.
TFTP Server Settings
The 480i phone uses the TFTP server to
download updates of the phone’s
firmware and configuration files. You
must set the TFTP server address in the
phone.
From the 480i Phone:
1. Press the button to
enter the Options List.
2. Select option 8. Network.
3. Enter the administrator’s
password. The default password
is 22222.
4. Select option 6. TFTP Server to
change the TFTP server.
5. You will see three options:
Primary TFTP, Alternate
TFTP, and Use Primary/Use
Alternate. If DHCP is on, the
Primary TFTP is read-only. To
manually configure the TFTP
address, select Alternate TFTP.
Select Use Primary/Use
Alternate to choose between the
primary and alternate TFTP
server.
From the Web Client:
1. Click on the Network sub-
category under the ADMIN main
category.
2. Enter the administrator user
name and password (the default
user name is “admin” and
password is “22222”).
3. In the TFTP field, enter the IP
address of the TFTP server.
If DHCP is off, set TFTP to the
primary address. If DHCP is on,
and you would like to manually
configure the TFTP server
address, set it in the alternate
TFTP field, and check the Use
Alternate TFTP checkbox.
4. Click on the Set Values button to
save the changes that you just
made.
SIP settings
The 480i uses the information in the SIP
settings to register at the IP PBX. To
configure the SIP settings:
From the 480i Phone:
1. Press the button to
enter the Options List.
2. Select option 9. SIP Settings.
3. Enter the administrator’s
password. The default password
is 22222.
8 SIP 480i IP Phone Admin Guide