Vestax CDX-15 owner manual Mixer Section, How to replace the fader

MIXER SECTION

15

13

12

14

⑮MONITOR SELECT SWITCH

Used to select the program channel for headphone monitoring. The signal of the selected PGM channel can be monitored from the left side of the headphones. The signal being output can be monitored from the right side. In the centre position, MIX is selected, the master signal can be monitored in stereo.

⑫LEVEL VOLUME (PGM A, PGM B)

Used to adjust the input level of each program.

⑬INPUT LEVEL METER

The LED level meters indicate the input signal level of each PGM channel.

Please adjust the input level so that 0dB LED lights on peak.

⑭CROSSFADER

The signal of PGM1 can be monitored when the cross fader is set to the left side. The signal of PGM2 can be monitored when the cross fader is set to the right side . When the cross fader is set in the middle, both programs can be monitored.

The cross fader of the CDX-15 is a user-replaceable fader for ease of replacement. When the cross fader is worn out, please replace it with the optional replacement fader, CF-R.

How to replace the fader

●Remove the fader knob and four screws securing the fader panel.

●Remove the fader unit.

●Remove the multi-cable connector from the fader unit carefully.

●Insert the multi-cable connector to the new fader unit.

●Place the fader unit and secure it with four screws.

Remore the multi cable

connector from fader unit.

Remore four screws

10