OPERATION (Same for Player A and B)
NORMAL PLAYBACK
[1]Turn the power on by pressing the POWER switch.
[2]Open the CD door and place the disc into the centre shaft until the ball chucking holds the CD with a click. Close the CD door.
CD disc starts spinning and the laser
[3] Press PLAY/PAUSE button.
Starts playback from the first track immediately. Remaining time of the playing track will be shown on the digital display in minutes, seconds and frames.
[4] Press NEXT button to skip to the next track.
Stop playing current track and starts playing back from the beginning of next track.
[5]Press PLAY/PAUSE button to stop playback. Press PLAY/PAUSE button again to
[6]Press STOP button when the CD is not played for a while. This prevents the laser pick up from wearing out. The
STANDBY MODE
In case the player is kept in PAUSE mode for over ten minutes, the
●Pressing PLAY/PAUSE button. ●Pressing CUE button. ●Pressing STOP button. ●Pressing NEXT button. ●Pressing PREVIOUS button. ●Opening the top door.
[7] Open the top door and pull out the disc.
BASIC OPERATION FOR DJ PLAY
[1]Start to play back by pressing PLAY/PAUSE button.
[2]Set MONITOR mode by pressing MONITOR button.
[3]Search for the approximate position to start by moving the STICK CONTROLLER left or right.
[4]Set PAUSE mode by pressing PLAY/PAUSE BUTTON and press MONITOR button.
Repeat sound of pause point can be monitored in 4 frame cycles.
[5]Now the STICK CONTROLLER is set to the SEARCH mode.The exact start position can be searched by moving the STICK CONTROLLER.
[6]Press MONITOR button after the start position is accurately set.
Repeat sounds stops.
[7]Play back by pressing PLAY/PAUSE button again.
[8]Adjust the pitch by using PITCH CONTROL FADER and STICK CONTROLLER to match the tempo with the other music.
13