Vestax PCV-150 owner manual 10 16, 2INPUT EQ-LOWEqualizer Low

10 16 15

	PCV-150 / PROFESSIONAL MIXING CONTROLLER	150
	FOR THE CREATIVE DJ / PRODUCER
LINE	ALLOWS YOU TO CREATE YOUR OWN MUSIC WITH
	VESTAX'S UNSURPASSED ENGINEERING AND DESIGN.
5

MASTER LEVEL

L
-20	-16	-12	-10	-8	-4 -2	0	+2 +4	+8	+12 dB
MAX
R
+6dB										17
OUTPUT
						BALANCE				18
+6dB
								L	R	19
SUB MASTER		CUE OUT					MASTER		MASTER CUE
							OUT
+6dB										20
MIN	MAX			MIN		MAX		MIN	MAX
CROSS FADER
L										22
CF ASSIGN									CF ASSIGN
PGM 1									PGM 3
PGM 2									PGM 4
TRANSFORMER									TRANSFORMER
12					21			23

!2INPUT EQ-LOW(Equalizer Low) !9MASTER OUTPUT LEVEL

Auxiliary bass knob. Boosts of +6dB and cuts of - 24dB are possible at 80Hz.

Adjust the signal level output from MASTER OUT jack on the rear panel.

!3CUE SWITCH

Used to send the signal to the monitor section for head phone.

!4INPUT FADER

Used to adjust input level of the various PGM channels. Usually at 7-8.

!5PEAK LEVEL METER

The bar graph level meters indicate the peak L&R output.

!6SUB MASTER OUTPUT LEVEL

Adjust the signal level output from SUB MATER OUT jack on the rear panel.

!7CUE OUTPUT LEVEL

Adjust the signal level output from CUE OUT jack on the rear panel.

!8MASTER BALANCE

Determines balance between left and right channels.

@0MASTER CUE SWITCH

Used to send the signal to the monitor section for head phone.

@1CROSS FADER

Mixes the signals assigned by CROSSFADER ASSIGN SWITCH (@2) to left side of the crossfader and right side. When the crossfader is in the center position, both left and right signals can be heard. This is a detachable feder for ease of replacement with CF-PCV when it is worn out.

@2CROSSFADER ASSIGN SWITCH

Used to assign the signals from each of the PGM channels to either side of the crossfader or to the master section.

@3TRANSFORMER SWITCH

With the crossfeder moved to either right or left, the opposite program can be heard instantly by pressing the opposite transformer button.

6