Vestax PMC-07ProISP owner manual 2MONITOR Select Switch

Models: PMC-07ProISP

1 17
Download 17 pages 8.84 Kb
Page 6
Image 6

qEFFECT SEND MASTER VOLUME

Adjusts the output level of the EFFECT SEND.

wEFFECT RETURN VOLUME

Adjusts the input level from the EFFECT RETURN.

eEFFECT RETURN EQUALIZER

HI and LO frequency adjustment of effects signal.

rEFFECT RETURN ASSIGN SWITCH

The switch selects return point of effects.

PGM1・・・・・・・Assigns effects to the Q-stick on PGM1.

PGM2・・・・・・・Assigns effects to the Q-stick on PGM2.

MASTER・・・・ Assigns effects to pre-master fader.

tPROGRAM GAIN VOLUME

Adjusts the input level of each program. The INPUT LEVEL METER (!8) should be at 0dB when the INPUT FADER (!9) is at 7 or 8 position.

y3 BAND EQUALIZER

Adjusts HI, MID and LO frequencies on each program.

uPROGRAM EFFECT SEND VOLUME

Adjusts the send level for each program individually. When this volume is minimum, the same effect is off.

iPROGRAM REVERSE SWITCH

Switches PGM1 and 2 simultaneously.

oMASTER TRIM VOLUME

Trim adjustment for master level fader.

!0MASTER FADER

Adjusts overall master output level.

!1SESSION MIX VOLUME

Adjusts the input level of SESSION IN JACKS (#5, #6).

!2MONITOR SELECT SWITCH

This allows monitoring of the MASTER OUT (#1,#2) or the CF MONITOR (@2).

!3Q-STICK ON/OFF SWITCH

When this switch is on, the Q-stick functions. When this switch is off, the Q-stick does not function.

!4Q-STICK(Quadraphonic Stick)

Controls the volume sent to the four speakers or zones.

!5METER SELECT SWITCH

Selection for LED to represent each program or the level of the master output.

!6POWER LED

Illuminates when power is on.

!7FADER REVERSE LED

Illuminates when respective faders are in reverse mode.

!8LED LEVEL METER

Displays level of signal for each program or master out (determined by METER SELECT SWITCH (!5).

!9IF (INPUT FADER)

This faders controls level of input signal for each program. This fader is easily replaced by user. Use IF-07PCV or IF-07PRO as replacements. See "HOW TO CHANGE THE FADER UNIT".

@0CF (CROSS FADER)

Used to mix sound between PGM1 and 2, also detachable and easily replaced with CF-05PCV or CF-05PRO.

@1MONITOR LEVEL FADER

Controls level in headphones.

@2CF MONITOR

Crossfades signal to be monitored from each program.

5

Page 6
Image 6
Vestax PMC-07ProISP owner manual 2MONITOR Select Switch