23.[−] Minus Key
Subtracts an amount from the accumulator. To subtract the same amount more than one time (repeat subtraction), enter that amount once and depress the [−] key as many times as necessary. If this key is depressed immediately after [%±] key, it works as percent minus key.
Used to enter ‘−’ in PC Application.
24.[+] Plus Key
Adds an amount to the accumulator. To add the same amount more than one time (repeat addition), enter that amount once and depress the [+] key as many times as necessary. If this key is depressed immediately after [%±] key, it works as percent plus key.
Used to enter ‘+’ in PC Application.
25.[TIME/DATE] Time and Date Display Key
Used to display or program the date and time. Depressing this key once will cause the date to display, a second depression will display the time. Holding the key down for three seconds will cause the date or time to flash, this is the program mode.
26.[# / S] Date / Subtotal Key
#: It will print live entry as an identifier as an invoice number with “#” mark.
S : It prints but does not clear the accumulator.
27.[T] Total Key
Prints and clears the accumulator. When this key is pressed with the “GT” switch is on, the result is accumulated automatically in the Memory register.
[ENTER] Enter Key
Used to enter new paragraphs in PC application.
28.[MT] Memory Total Key
Prints and clears the memory.
[↑] Move Up Arrow Key
Used to move to one cell up in PC application.
29.[MS] Memory Subtotal Key
Prints but do not clear the memory.
[↓] Move Down Arrow Key
Used to move to one cell down in PC application.
11
