Victor 1280-7 USB manual Replacing Ink Ribbon, Replacing With Cartridge Ribbon

REPLACING INK RIBBON

Your calculator is shipped with a 2-color ribbon already in place. You do not need to install or change it before you begin using the calculator. When you have been using your calculator for some time, however, the print will gradually become faint, indicating that you should change the ribbon. To change the ribbon, follow these steps.

1.Remove paper roll, tearing paper at rear of calculator. Use the Paper Advance (↑) key to feed the remaining paper tape through the printer. Then remove the printer cover.

2.Remove the old ribbon by pulling upward.

3.Install the ribbon spool with the black edge up. Roll from the outside of the full spool and place the first spool on the spindle not engaged by the lever. Thread the new ribbon along the outside of the guides and in front of the print wheels. Switch the lever to the other side and replace the second spool.

4.Rotate the spools to take up any slack. Replace the printer cover and the paper tape.

Correct direction Incorrect direction

REPLACING WITH CARTRIDGE RIBBON

You have the option to use a cartridge ribbon in this model.

1.Remove paper roll, tearing paper at rear of calculator. Use the Paper Advance (↑) key to feed the remaining paper tape through the printer. Then remove the printer cover.

2.Remove the old ribbon/cartridge by pulling upward

3.Install the new cartridge by pressing it down with the VICTOR logo facing up, as shown.

4.Replace the printer cover and the paper tape.

-4 -