24 EN BASIC OPERATIONS

Voice Recording

 

MODE

 

Zoom Lever

 

Recording Start/Stop

 

Button

3

2

 

Lock Button

 

Power Switch

 

49

Voice Playback

1 Set the power switch to while pressing down the lock button located on the switch.

2 Press MODE to select .

To change the playback speed, see pages 26 and 30.

To switch the medium to be played back, see pages 26 and 27.

3 Press 49 to start playback.

4 To pause playback, press 49 again.

To adjust the speaker volume

During playback slide the zoom lever towards T to turn up the volume, or towards W to turn down the volume.

Playback Operations

6 5

1 Set the power switch to while pressing down the lock button located on the switch.

High-Speed Search

Press 3 or 5 during playback.

Locating the start point of the file or skip the file Press 2 or 6 during playback or pause mode.

2 Press MODE to select .

The camera is programmed to record voice on the medium in the SD slot by the factory preset. To switch the recording medium, see pages 26 and 27.

To change the sound quality and recording level, see pages 26 and 30.

3 Press the recording start/stop button to start recording.

4To stop recording, press the recording start/stop button again. The camera re-enters the record-standby mode.

NOTE:

For approximate recording time, see page 43.

Deleting Files

If you press during recording mode, the file recorded most recently will be deleted.

Deleting Voice Files

Press , then press rt to select [EXECUTE] and press 49.

You can select the desired file to be deleted by pressing w e.

To delete multiple files at once, see pages 26 and 29.

However, if the recording mode (video, still image or voice) is switched or the power is turned off and on again after recording, you cannot delete the file.

Page 24
Image 24
Victor GZ-MC100 instruction manual Voice Recording, Voice Playback, Playback Operations, Deleting Voice Files