BASIC OPERATIONS EN 25
Connecting to a TV or VCR | 6 Start playback on the camera. ( pg. 21) | |
To choose whether or not the following displays | ||
| ||
| ||
| appear on the connected TV |
● Date/Time
Open the cover.Set [DATE/TIME] to [AUTO], [ON] or [OFF]. ( pg. 26, 27) ● Counter
Set [SCENE COUNTER] to [ON] or [OFF]. ( pg. 26, 27)
(Pressing INFO button also turns on/off the displays.)
To AV connector
TV
VCR
A Black to
B Yellow to VIDEO IN (Connect when your TV/VCR has only A/V input connectors.)
C Red to AUDIO R IN* D White to AUDIO L IN*
NOTES:
●It is recommended to use the AC Adapter as the power supply instead of the battery pack. ( pg. 14)
●To monitor the picture and sound from the camera without
inserting a recording medium, set the camera’s power switch
to 
, then set your TV to the appropriate input mode.
●Make sure you adjust the TV sound volume to its minimum level to avoid a sudden burst of sound when the camera is turned on.
●To connect the camera to a PC, refer to the software installation and USB connection guide.
Dubbing to a VCR
1 Perform step 1 to 6 above.
2 At the point you want to start dubbing, start recording on the VCR. (Refer to the VCR’s instruction manual.)
3 To stop dubbing, stop recording on the VCR, then stop playback on the camera.
BASIC OPERATIONS
* Not required for watching still images only.
1 Make sure all units are turned off.
2 Connect the camera to a TV or VCR as shown in the illustration.
If using a VCR, go to step 3. If not, go to step 4.
3 Connect the VCR output to the TV input, referring to your VCR’s instruction manual.
4
5 Set the VCR to its AUX input mode, and set the TV to its VIDEO mode.
