Video Products RJ45-5EWTP-QR-PCB manual Terminate the CATx shielded cable with an RJ45 connector

VPI VIDEO 1275 Danner Drive Aurora,Ohio 44202

PRODUCTS Tel: 330-562-2622 Fax: 330-562-1999

www.vpi.us

INCORPORATED

Weatherproof Cable Shield Assembly Procedure

For Outdoor CAT5/5e/6/6a Shielded Cable Installations

The Weatherproof Cable Shield is a water-tight cable restraint to be applied to

shielded Cat5/5e/6/6a cable to make a weatherproof cable connection to outdoor enclosures. To make sure the connection is waterproof upon completion, follow the steps below.

1. Insert the seal ring into the housing.

2.Strip the CATx shielded cable jacket (6mm-7mm O.D.) approximately ½” and insert the cable through the sealing nut, screw nut, and housing. (Note: Heat shrink tubing can be applied to cable to increase the O.D. to 6mm-7mm.)

	housing	screw nut	sealing nut	CATx cable
strip approx. ½”

Note: CATx cable used must be shielded cable.

3. Terminate the CATx shielded cable with an RJ45 connector.