Video Products RJ45-5EWTP-QR-PCB manual Snap handle

4. Set the RJ45 connector into the housing such that the snap handle is in the notch.

Snap handle

5. Make certain that the seal ring is fully-seated into the housing.

THIS STEP IS EXTREMELY IMPORTANT TO ENSURE A WATER-TIGHT SEAL!

Seal ring fully-seated

Seal ring fully-seated

6.Plug the assembly into the socket on the enclosure and secure the screw nut. Then apply the sealing nut and securely tighten.

Securely tighten sealing nut to housing.

MAN121 REV. 4/9/10