Video Products USB-SUN Technical Specifications, Mating face of a USB Type B Female, A N G E S

PLEASE NOTE: It is necessary to configure the host (Sun) computer such that the Sleep Mode is not enabled. If the host computer goes into sleep mode either automatically or manually, the user must reboot the host computer in order to resume use of the host computer.

To disable the Sleep Mode, perform the following steps:

1.Select "Power Manager"

2.Look for "Device Idle Time Before Power Saving Starts"

3.Select "Always ON"

4.Look for "Override Device Idle Time For:"

5.Make sure neither "Monitors " nor "Disks" are selected.

Technical Specifications

Mating face of a USB Type B Female M a t i n g F a c e o f a 8 p i n m i n i D I N F e m a l e

21

34

Fig. 6

PIN # SIGNAL

1+VCC

2- DATA

3+DATA

4GND

86

7

5 4 3

2	1
	Fig. 7

PIN #	SIGNAL
1	GND
2	GND
3	+5
4	MOUSE
5	KYBD RCV
6	KYBD XMT
7	PWRN
8	+5

W A R R A N T Y I N F O R M A T I O N

The warranty period on this product (parts and labor) is one (1) year from the date of manufacture (indicated on the bottom of the product). Please contact Network Technologies Inc at (800) 742-8324(800 - RGB - TECH) or (330) 562-7070or visit our website at http://www.nti1.com for information regarding repairs and/or returns. A return authorization number is required for all repairs/returns.

C O P Y R I G H T

Copyright © 2001 by Network Technologies Inc. All rights reserved. No part of this publication may be reproduced, stored in a retrieval system, or transmitted, in any form or by any means, electronic, mechanical, photocopying, recording, or otherwise, without the prior written consent of Network Technologies Inc, 1275 Danner Drive, Aurora, Ohio 44202

C H A N G E S

The material in this guide is for information only and is subject to change without notice. Network Technologies Inc reserves the right to make changes in the product design without reservation and without notification to its users.

SERIAL NO.:

INSPECTED BY:

DATE:

3