PowerAlert UPS monitoring and unattended shutdown software enables configurable network broadcast messaging, email notification, event logging and running
Offers simultaneous monitoring through included USB and DB9 interface ports, or the monitoring by any number of additional servers over IP with included PowerAlert monitoring software.
Communications ports support messaging of UPS and line power status, including
Emergency Power Off (EPO) interface with cable
Supports timed inverter shutoff after unattended shutdown, activate
Supports Tripp Lite's WatchDog software application to restore operation to locked equipment through soft reboot of application, OS or hard power off/on reboot of connected equipment - ideal for unattended kiosk applications (requires optional WATCHDOGSW)
Emergency Power Off (EPO) interface with cable
Attractive
UPS battery set ships fully assembled, no time consuming connection of internal batteries by user is necessary
Specifications
OUTPUT
Output Volt Amp Capacity (VA)
Output kVA capacity (kVA)
Output Watt Capacity (watts)
Output kW capacity
Output power factor
Nominal Output Voltage(s) Supported
Nominal Voltage details
Frequency compatibility
Output voltage regulation (line mode)
Output voltage regulation (Battery mode)
Built-in UPS output receptacles
Included output power cables
Output circuit breaker
Output AC waveform (AC mode)
Output AC waveform (battery mode)
3000
3
2250
2.2
0.8
230V
230v nominal inverter output voltage
50 / 60 Hz
230V
+/- 5%
8 C13 outlet(s); 1 C19 outlet(s)
Includes 3 C13 to C14 output power cables
Three switchable
10A (x2) - each breaker protects 4 C13 outlets, C19 outlet does not include a breaker
Sine wave
Pure Sine wave