Vidikron 50 manual On-Screen Display Menus, Freq. Adjusts the frequency of the signal

On-Screen Display Menus

HD/RGB Adjust 

Press ENTER to display the HD/RGB Adjust menu. Use these settings to fine-tune 480p and higher-resolution signals for optimum picture quality.

•Auto: To adjust the phase, frequency and position automatically, highlight “YES?” and press ENTER.

•Freq.: Adjusts the frequency of the signal.

•Phase: Adjusts the phase of the input signal (similar to tracking on a VCR).

•H. Pos.: Adjusts the horizontal position of the image.

•V. Pos.: Adjusts the vertical position of the image.

HD/RGB Adjust

Auto Adj.	YES?
Freq.	0
Phase	+10
H.Pos.	0
V.Pos.	0

Blue Enable

NOTE: To adjust the image position with a 480i source, use the Image Shift controls in the Service menu, described on page 41.

Press the ▲ or ▼ arrow buttons to turn on or off the Blue Enable feature. Blue Enable removes all red and green color information from the image, and is useful for color- calibrating the projector or other video components.

Save Settings Once the desired adjustments have been made, select Save Settings to save these settings into the “Custom 1” memory location.

Load Saved Settings To recall stored custom image quality settings, select Load Saved Settings and choose “Custom 1,”“ISF Night” or “ISF Day.”

38 Vidikron Vision Model 50 Owner’s Operating Manual