Vidikron 80 Terminal Description (continued)

36

2-3. Parameters used for the data format

The following 3 types of parameters are used for command and response data:

1 Numeric value 2 ON/OFF 3 Special parameters

Each parameter is as follows:

1 Numeric value

A 2-byte hexadecimal value (sign included) is represented by a set of 4-digit (4-byte) characters.

Assignable range: 8000H to 7FFFH

2 ON/OFF

Shows the status (ON or OFF) of the unit, such as POWER and HIDE.

Character Hex Meaning

0 30 OFF

131ON

3 Special Parameters

Parameters for input video-image format

Character Hex Meaning

0 30 60p

1 31 50p

Operation mode parameters

Character Hex Meaning

0000 30h 30h 30h 30h Standby mode

0001 30h 30h 30h 31h Power-on mode

0002 30h 30h 30h 32h Cool down mode

0004 30h 30h 30h 34h Emergency mode

3. Ex ternal control command table

Function Command Asking Data Type

Power On ELSE Numeric Value ON / OFF Special Data

Operate U0F X X X O X

MUTE U00 O X X O X

Left/Right Reversal U17 O X X O X

Top/Bottom Inversion U18 O X X O X

Operation Mode Z03 O O X X O

Operation mode: Only Asking command is possible

Terminal Description (continued)

Contents

Main Table of Contents Accessories Introduction to the Vidikron Vision Model 80 D-ILA Projector Introduction The Features Youll enjoy include: Contents of the package Options: Safety Precautions NOTICE (For USA) WARNING: CAUTION: FCC INFORMATION (U.S.A. only) CAUTION: Page Safety Precautions (continued) WARNING: About Burning-in of D-ILA Device Viewing Conditions (Brightness of Room) Standard for gauging replacement time of components Environment of Use Maintenance Procedures Two Year Limited Warranty Warranty For Projectors, Video Processors and Controllers Page Controls and Features Projector Chassis Cover Connector Panel Controls and Features (continued) Indicator Display on the Control Panel Remote Control Controls and Features (continued) Installation Environment Precaution for Usage Precautions for Installation Installing the Projector Minimum Space Required Projector and Screen Installation Installing the Projector (continued) Page Page Connecting to Devices Connecting to the VDP-80 digital video processor Control from an external automation device Connecting to Various Devices Connecting the Power Cord (supplied) Connecting to Various Devices (continued) Cautions Against Fire and Electric Shock Basic Operation 1 2 3 5 Basic Operation (continued) 4 Adjustments and Settings Using Menus The menus displayed on the screen are used to perform adjustments and settings for this unit. Information Menu Menu Structure The menus of this unit have the following structure. Menu Operation Buttons Adjustments and Settings Using Menus (continued) Main unit Remote control unit Menu Operation Buttons 1 1, 6 E.g.: Blanking menu E.g.: Blanking menu E.g.: Projector Opt menu E.g.: OSD Position menu E.g.: Picture Adj menu Adjustments and Settings Using Menus (continued) 1 Picture adjust Menu 2 Projector Opt Menu 3 Options Menu 4 Information Menu Screen Blanking 1 2 3 4 V Shift Setting 1 3, 4 2, 5 2.35:1 Cinemascope image Replacing the Lamp (For service personnel only) Lamp and Lamp Usage Time About Lamp Replacement Resetting Lamp Time Page What to do when these messages are displayed Warning Indication About warning indicators Actions to be taken upon warning indications Please follow the procedures below. Troubleshooting Before sending the unit to your Vidikron dealer for repair, check the following points. Terminal Description Pin Arrangement DVI Terminal RS-232C Terminal RS-232C External Control [] Terminal Description (continued) Speci cations