![](/images/new-backgrounds/1108340/10834027x1.webp)
Controls and Features (continued)
Remote Control
12
3
4 |
| 5 |
|
| 7 |
PRESET |
|
|
6 |
| ENT |
|
| 9 |
TEST | MUTE | LIGHT |
8 |
| 10 |
1.[ON] Button
When this unit is in the standby mode, pressing the button for more than 1 second will turn this unit on and cause the [OPERATE] indicator to light up.
2.[OFF] Button
When this unit is in operation (projecting), press it for 1 second or more to switch to the cool down mode, which will automatically switch to the standby mode after about
90 seconds. The [OPERATE OFF] button will not work within approximately 1 minute after the light source has been turned on. Start operation only after 1 minute’s time.
3.Cursor [ 3 / 4 / 5 / 6 ] Buttons
Use these buttons when adjusting the menu items.
4.[EXIT] Button
Press this button to return to the previous hierarchical menu (for example, to return from submenu to main menu). Pressing this button when the menu is displayed will clear the menu.
5.[MENU] Button
Press this button to display the menu. Pressing this button when the menu is displayed clears the menu.
6.[PRESET] Button
Use this button to reset the values to factory settings when the “Gamma”, “Color temp.”, “Mask” or “Picture shift” item in the menu is selected.
7.[ENT] Button
Press this button to show the next hierarchical menu (for example, to enter submenu from main menu). It is also used when “ENTER” is displayed against a selection item on the menu screen
8.[TEST] Button
Press this when adjusting focus, screen size or picture quality. Press the button to switch to the test pattern image for adjustment.
•Alter the test pattern with the [TEST] button.
•Press the [EXIT] button to return to the original image.
9.[MUTE] Button
Press this button to temporarily clear the video image. Press again to resume.
10.[LIGHT] Button
Lights up illumination (light) of the remote control buttons for about 10 seconds.
14