Vidikron VL-32HD, VL-26HD manual Picture Adjust, Perform the adjustments in the order listed here

Operation

Picture Adjust ➤

Picture Adjust

Brightness

Contrast

Color

Tint

Sharpness

Color Temp.

Backlight

Save Settings

Restore Settings

Use the controls in the Picture Adjust menu to calibrate your DView for optimum picture quality.

The DView has been designed to incorporate setup and calibration standards established by the Imaging Science Foundation (ISF). The ISF has developed carefully crafted, industry-recognized standards for optimal video performance and has implemented a training program for technicians and installers to use these standards to obtain optimal picture quality from Vidikron video display devices. Accordingly, Vidikron recommends that setup and calibration be performed by an ISF-certified installation technician.

All signal types require separate processing. Therefore, you need to calibrate each input separately.

When you change a picture quality setting, save the change to a preset

Note afterwards. Otherwise, the change will be lost when a different input is selected. (Picture quality settings are saved for each input and resolution separately.) For information about saving settings, refer to Save Settings (not available for RGB input) on page 33.

Although it may be possible to obtain satisfactory picture quality using the naked eye and regular program material, Vidikron recommends using the following calibration tools for best results:

•External test pattern source – Ovation Multimedia, Digital Video Essentials or AVIA test DVD or equivalent.

•A blue filter (provided with many test DVDs), for color level and tint adjustments.

Connect your test pattern source to the input that you are calibrating and proceed as follows.

Perform the adjustments in the order listed here.

28 Vidikron VL-26/VL-32 Owner’s Operating Manual