4high level inputs: to derive signal from the loudspeaker outputs of an amplifier using speaker cables for the connection, in cases where the preferred chinch input is not feasible.
ATTENTION: Please ensure the correct polarity (consistency of plus and minus) when connecting to the high level inputs!
5 chinch or RCA phono inputs: to derive signal from preamplifier or subwoofer outputs. The preferred method for connection of SUBSON.
ATTENTION: It does not matter, if you put the chinch cable into the left or right input (normally you only have one cable in your home theater, coming from the subwoofer channel).
6 adjustable crossover frequency control: crossover point for subwoofer is tuned according to the bass characteristic of your main loudspeakers and room acoustics.
7volume controller: to adjust overall output of SUBSON
8phase switch: critical adjustment to the phase characteristic of SUBSON in relation to the bass region of the main, as well as center and surround, loudspeakers; essentially aligns the timing of all of their output signals. Choose the switch position that results in more bass by testing with several
9on position: SUBSON always on
auto: SUBSON turns on when music is detected
Recommended: AUTO switches off the subwoofer after 15 minutes without a music signal. When music is played again, SUBSON returns to play mode automatically.
HOW TO PREPARE SUBSON FOR OPTIMAL SOUND
PERFORMANCE:
1.To avoid fingerprints on the aluminium, please put on the enclosed gloves when positioning SUBSON.
2.Connect SUBSON to your signal source by using the chinch or RCA phono cables. Alternatively, the SPEAKER LEVEL IN inputs can be used for signal connection. Using speaker wire, simply connect to the subwoofer from the main speaker output terminals of the main system amplifier.
3.Connect SUBSON to AC power outlet.
4.Turn the POWER switch on.
ATTENTION:
Do not be concerned if the LED does not glow immediately. In the recommended AUTO position, the LED only glows when a music signal is detected, at that time the subwoofer automatically turns on.
5.For best sound performance, it is very important to adjust SUBSON using the following steps. It may be helpful to have one person assist by adjusting the controls, while another remains in the listening position to guide the adjustments being made.
