Vienna Acoustics manual Carefully Before Operating Subson

PLEASE READ THE FOLLOWING SAFETY INSTRUCTIONS VERY

CAREFULLY BEFORE OPERATING SUBSON:

1.HEED WARNINGS. Observe all warnings on the subwoofer and in the operating instructions.

2.FOLLOW INSTRUCTIONS. Follow all operating and use instructions.

3.DAMAGE REQUIRING SERVICE. The product should be serviced by qualified personnel if:

a)The product does not appear to operate normally or exhibits a marked change in operation.

b)The power cord or plug has been damaged.

c)Objects or liquid have fallen into the product.

d)The product has been exposed to rain.

e)The product has been dropped or the enclosure damaged.

4.SERVICING. Do not attempt to service SUBSON beyond that described in the operating instructions. All other servicing should be referred to qualified service personnel.

5.INDOOR USE. SUBSON is designed for indoor use in dry, domestic environments only, and for use within a temperature range of 10 - 40 ° C (50 – 105 ° F).

6.OBJECTS AND LIQUID ENTRY. Do not let objects or liquids fall into the product. Do not place a vessel containing liquid on top of the product.

7.WATER AND MOISTURE. Do not use SUBSON near water, for example near a bathtub, or in a wet basement, or near a swimming pool.

8.WALL OR CEILING MOUNTING. SUBSON is neither suitable for mounting into the wall, nor for mounting on the ceiling, since one of the aluminium parts is working as heatsink. If you choose a position on the wall or on a shelf for SUBSON, the subwoofer must be firmly secured into position. Otherwise the subwoofer could fall down because of vibrations causing it to move, or “walk.”

9.VENTILATION. Site the subwoofer so that its location or position does not interfere with its proper ventilation. Especially the rear of SUBSON should be uncovered, since the heat sinking is mounted on the inner side of the rear plate of the cabinet.

The subwoofer should not be placed in a built-in installation, such as a bookcase or cabinet, that may impede the flow of air.

10.HEAT. Site SUBSON away from heat sources such as radiators, heaters, stoves, or other appliances (including amplifiers) that produce heat.

11.POWER SOURCES. Connect the subwoofer to an AC power outlet only of the voltage type marked on SUBSON (this will vary depending on the voltage in the country of sale and use).

12.POWER CORD PROTECTION. Route power cords so that they are not likely to be walked on or pinched by items placed upon or against them, paying particular attention to cords at plugs, power sockets, and at the point where they exit from the subwoofer.