ViewCast Osprey-450e, Osprey-240e manual Signal Detected, Lines detected, VCR Input, Output Enable

Setting Driver Properties

The Video Decoder tab has the following controls.

Video Standard	Select the video standard
Signal Detected	When the card does not detect the input signal, this field displays a 0.
	When the card detects the input signal, it displays 1.
Lines detected	This field displays the number of lines the card detects in the input
	signal.
VCR Input	This field is a DirectShow feature that is not implemented.
Output Enable	This field is a DirectShow feature that is not implemented.
OK	Click OK to accept the settings.
Cancel	Click Cancel to reject the settings and close the window.
Apply	Click Apply to apply the settings.
Help	Click Help to access the user guide.

The driver treats PAL-BDGHI identically (the exceptions with PAL are PAL-M and PAL-N which are their own beings) and the driver also treats all variations of SECAM the same.

22 ViewCast