ViewSonic N2752w, vs11257-1m manual Installation, Insert Remote Control Batteries

Installation

1. Insert Remote Control Batteries

ENGLISH

1 Remove the battery cover by pulling then lifting the knob on the cover.

2 Insert the batteries, corresponding to the (+) and (-) markings on the battery compartment. 3 Reattach the battery cover.

CAUTION

•Only use the specified AAA batteries.

•Do not mix new and old batteries. This may result in cracking or leakage, which may pose a risk of fire or lead to personal injury.

•Insert batteries according to (+) and (-) markings. Inserting the batteries incorrectly may result in cracking or leakage, which may pose a risk of fire or lead to personal injury.

•Dispose of the battery in accordance with local laws and regulations.

•Keep the battery away from children and pets.

•When the remote control will not to be used for an extended period, remove the batteries.

2.Connecting RF antenna, Cable TV Wire or DTV cable

Make sure the power is OFF before installing your LCD TV.

1)TV: Connect the LCD TV to TV antenna or set-top-box with 75-ohm coaxial cable. Preset the TV channels into memory with Auto Scan function when using an antenna or cable TV system without a cable connecter box (See page 19).

RF Cable or Adapter (not supplied)

ViewSonic 10 N2752w