ViewSonic N3290w Important Safety Instructions

Contact ViewSonic service team at: http://www.ViewSonic.com or call our service team: United States 1-800-688-6688, Canada 1-866-463-4775

ViewSonic 2 N3290w

Important Safety Instructions

1) Read these instructions completely before

using the equipment.

2) Keep these instructions in a safe place.

3) Heed all warnings.

4) Follow all instructions.

5) Do not use this apparatus near water.

6) Clean with a soft, dry cloth.

7) Do not block any ventilation openings. Install

the equipment in accordance with the

manufacturer’s instructions.

8) Do not install near any heat sources

such as radiators, heat registers,

stoves, or other devices (including

ampliﬁers) that produce heat.

9) Do not attempt to circumvent the safety

provisions of the polarized or grounding-

type plug. A polarized plug has two blades

with one wider that the other. A grounding

type plug has two blades and a third

grounding prong. The wide blade and the

third prong are provided for your safety. If

the provided plug does not ﬁt into your

outlet, consult an electrician for replacement

of the outlet.

10) Prevent the power cord from being tread

upon or pinched, particularly at the plug,

convenience receptacles, and the point

where they exit from the device. Be sure

that the power outlet is located near the

equipment so that it is easily accessible.

11) Only use attachments/ accessories speciﬁed

by the manufacturer.

12) Use only with the cart, stand, tripod,

bracket, or table speciﬁed by the

manufacturer, or sold with the

apparatus. When a cart is used,

use caution when moving the

cart/apparatus combination to avoid

injury from tip-over.

13) Unplug this apparatus when it will be unused

for a long period of time.

14) Refer all servicing to qualiﬁed service

personnel. Servicing is required when the

apparatus has been damaged in any way,

such as power-supply cord or plug is

damaged, liquid has been spilled or objects

have fallen into the apparatus, the

apparatus has been exposed to rain or

moisture, or the unit does not operate

normally, or has been dropped.

USE

AC power Cord

Keep the following guidelines to protect the AC

power cord from being damaged. If the AV

power cord is damaged, it may result in a ﬁre or

an electric shock. Stop using it and ask your

dealer or ViewSonic service center to exchange

it.

◊ Do not place the TV where the power cord is

subject to wear or abuse.

◊ Do not pinch, bend, or twist the cord

excessively. The core lines may be bared and

cut, causing a short-circuit, and resulting in a

ﬁre or an electric shock.

◊ Do not convert or damage the power

cord.

◊ Avoid power cord being rolled

over or rested upon.

◊ When the power cord plugged in, do not move

theTV.

◊ Keep the power cord away from heat sources.

◊ When you disconnect the AC power cord,

disconnect it from the wall outletﬁrst.

◊ When disconnecting the power cord, grasp the

plug instead of pulling the power cord.

◊ Use only an original ViewSonic AC power

cord, not other brands.

◊ Do not use the supplied AC power cord on

any other equipment.

Wall outlet

The TV set with a three-wire grounding type

AC power cord plug must be

connected to an AC power socket

outlet with a protective grounding

connection.

Do not use an unﬁtting outlet.

Insert the plug fully into the outlet. If it

is loose, do not use it. Doing so may cause arcing

and result in a ﬁre.

Contact your electrician to change the outlet.

Wiring

For your safety, be sure to unplug the AC power

cord when connecting cables.

Take care not to trip on the cables. It may cause

damage to the TV set.

Electric shock

Do not touch the AC power cord or the TV

with a wet hand. If you plug/unplug

the AC power cord from the TV with

a wet hand, it may cause electric

shock.

Lightning storms

During a lightning storm, unplug the TV from the

wall outlet and disconnect the antenna to revent

damage to the TV.