ViewSonic PJD5523W, PJD5233, PJD5133 warranty How to operate

How to operate

1.Press MENU on the projector or Menu on the remote control to open the OSD menu.

2.When OSD is displayed, use / to select any feature in the main menu.

3.After selecting the desired main menu item, press to enter sub-menu for feature setting.

4.Use / to select the desired item and adjust the settings with / .

5.Press MENU on the projector or Menu on the remote control, the screen will return to the main menu.

6.To exit OSD, Press MENU on the projector or Menu on the remote control again. The OSD menu will close and the projector will automatically save the new settings.

Picture

Color Mode

There are many factory presets optimized for various types of images.

„	Brightest	: For the brightest environment.
„	PC	:	For computer or notebook.
„	Movie	:	For home theater.

„ViewMatch : For accuracy color performance.

„User 1 : Memorize user 1 defined settings.

„User 2 : Memorize user 2 defined settings.

„White Board : For white projection screen type.

„Black Board : For black projection screen type.

„Green Board: For green projection screen type.

Reference Mode

Select a picture mode that best suits your need for the image quality and further fine- tune the image. This function is only available when User 1 or User 2 is selected.

„	PC	:	For computer or notebook.
„	Movie	:	For home theater.

„ViewMatch : For accuracy color performance.

„ Brightest : For the brightest environment.

Brightness

Brighten or darken the image.

Contrast

Set the difference between light and dark areas.

Color Setting

Adjust the color temperature. At higher temperature the screen looks colder; at lower temperature, the screen looks warmer. If you select “User”, then you can change the intensity of each of 3 color (Red, Green, Blue) to customize user color temperature.

28