Declaration of RoHS Compliance
This product has been designed and manufactured in compliance with Directive 2002/95/EC of the European Parliament and the Council on restriction of the use of certain hazardous substances in electrical and electronic equipment (RoHS Directive) and is deemed to comply with the maximum concentration values issued by the European Technical Adaptation Committee (TAC) as shown below:
Substance | Proposed Maximum | Actual Concentration | |
Concentration | |||
|
| ||
|
|
| |
Lead (Pb) | 0.1% | < 0.1% | |
|
|
| |
Mercury (Hg) | 0.1% | < 0.1% | |
|
|
| |
Cadmium (Cd) | 0.01% | < 0.01% | |
|
|
| |
Hexavalent Chromium (Cr6+) | 0.1% | < 0.1% | |
Polybrominated biphenyls (PBB) | 0.1% | < 0.1% | |
|
|
| |
Polybrominated diphenyl ethers (PBDE) | 0.1% | < 0.1% | |
|
|
|
Certain components of products as stated above are exempted under the Annex of the RoHS Directives as noted below:
Examples of exempted components are:
0HUFXU\LQFRPSDFWÀXRUHVFHQWODPSVQRWH[FHHGLQJPJSHUODPSDQGLQRWKHUODPSVQRW VSHFL¿FDOO\PHQWLRQHGLQWKH$QQH[RI5R+6'LUHFWLYH
/HDGLQJODVVRIFDWKRGHUD\WXEHVHOHFWURQLFFRPSRQHQWVÀXRUHVFHQWWXEHVDQGHOHFWURQLF ceramic parts (e.g. piezoelectronic devices).
3.Lead in high temperature type solders (i.e.
4.Lead as an allotting element in steel containing up to 0.35% lead by weight, aluminium containing up to 0.4% lead by weight and as a cooper alloy containing up to 4% lead by weight.
ViewSoniciii
PJD6230/PJD6240
