23 ViewSonic PJ250
Compliance Information for U.S.A.
This equipment has been tested and found to comply with the li mits for a Class A digital device, pursuant to
part 15 of the FCC Rules. These limits are designed to prov ide reasonable protection against harmful interfer-
ence. This equipment generates, uses, and can radiate radio fr equency energy, and if not installed and used
in accordance with the instructions, may cause harm ful interference.
WARNING
This is a class A product. In a domestic environment this product may cause radio interference in which case the user may
be required to take adequate measures.
RF Interference WARNING
The Federal Communications Commission does not allow any modifications or changes to the unit EXCEPT those speci-
fied by ViewSonic in this manual. Failure to comply with this government regulation could void your right to operate this
equipment. This equipment has been tested and found to comply with the limits for a Class A digital device, pursuant to
Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference when
the equipment is operated in a commercial environment. This equipment generates, uses, and can radiate radio frequency
energy and, if not installed and used in accordance with the instruction manual, may cause harmful interference to radio
communications. Operation of this equipment in a residential area is likely to cause harmful interference in which case the
user will be required to correct the interference at his own expense.
FCC Warning
To assure continued FCC compliance, the user must use grounded power supply cord and the provided
shielded video interface cable with bonded ferrite cores. If a B NC cable is going to be used, use only a
shielded BNC(5) cable. Also, any unauthorized changes or mo difications not expressly approved by the party
responsible for compliance could void the user's autho rity to operate this device.
Instructions to Users
This equipment complies with the requirements of FCC (Federal Communication Commission) equipment provided that
the following condition is met. Use the cables which are included with the projector or specified.
Compliance Information for Canada
Notice: This class A digital apparatus complies with Can ada ICES-003.
Compliance Information for European Countries
CE Conformity
The device complies with the requirements of the EEC directi ve 89/336/EEC as amended by 92/
31/EEC and 93/68/EEC Art.5 with regard to “Electromagnetic comp atibility,” and 73/23/EEC as
amended by 93/68/EEC Art.13 with regard to “Safety.”
User Information for all Countries
NOTICE: Use the cables which are included with the projector or specified.