TURNING OFF THE POWER
|
|
| STANDBY/ON |
VIDEO | RGB | SEARCH |
|
ASPECT |
| AUTO | BLANK |
MAGNIFY | HOME | PAGE UP | VOLUME |
ON |
|
|
|
| END | PAGE DOWN | MUTE |
OFF |
|
|
|
FREEZEKEYSTONE
POSITIONMENU
ENTER
ESCRESET
Control panel
on off
video rgb
reset
lamp
keystone | temp |
power
1 | Press the STANDBY/ON button of the remote |
| control or on/off button of the control panel |
The message "Power off?" will appear on the screen for approximately 5 seconds.
2 | Press the STANDBY/ON button or the on/off |
| button again |
Press the STANDBY/ON button or on/off button again while the "Power off?" message is visible. The projector lamp goes off and starts cooling down. The power indicator blinks orange while the lamp cools down. (Pressing the STANDBY/ON button while the power indicator is blinking orange has no effect.)
The system goes into the STANDBY mode after cooling down and the power indicator stops blinking orange and then lights to solid orange.
3 | Check that the power indicator stops |
| blinking and lights to solid orange. |
Switch the power switch to [O] (OFF).
menu
When the projector has completed powering down,
power switch
NOTE
•Except in emergencies, follow the above- mentioned procedure for turning power off.
the power indicator will go off.
POWER indicator
16
