Other Information, Specifications | ViewSonic VA2033A-LED guide

Other Information

LCD	Type	TFT (Thin Film Transistor), Active Matrix 1600 x 900 LCD,
		0.2768 mm pixel pitch
	Display Size	Metric: 51 cm
		Imperial: 20” (20” viewable)
	Color Filter	RGB vertical stripe
	Glass Surface	Anti-Glare

Input Signal	Video Sync	RGB analog (0.7/1.0 Vp-p, 75 ohms)
		TMDS Digital (100ohms)(For VA2033-LED only)
		Separate Sync
		fh:24-82 kHz, fv:50-75 Hz
Compatibility	PC	Up to 1600 x 900 Non-interlaced
	Macintosh1	Power Macintosh up to 1600 x 900
Resolution	Recommended	1600 x 900 @ 60 Hz
	and supported	1440 x 900 @ 60, 75 Hz
		1280 x 1024 @ 60, 75 Hz
		1024 x 768 @ 60, 70, 72, 75 Hz
		800 x 600 @ 56, 60, 72, 75 Hz
		640 x 480 @ 60, 75 Hz

Power	Voltage	100-240 VAC, 50/60 Hz (auto switch)

Display area	Full Scan	442.8 mm (H) x 249.075 mm (V)
		17.43” (H) x 9.8" (V)

Operating	Temperature	+32° F to +104° F (0° C to +40° C)
conditions	Humidity	20% to 90% (non-condensing)
	Altitude	To 10,000 feet

Storage	Temperature	-4° F to +140° F (-20° C to +60° C)
conditions	Humidity	5% to 90% (non-condensing)
	Altitude	To 40,000 feet

Dimensions	Physical	480 mm (W) x 376.1 mm (H) x 191.1 mm (D)
		18.9" (W) x 14.8" (H) x 7.52" (D)

Weight	Physical	5.95 lbs (2.7 kg)

Regulations		CCC, UL/cUL, FCC-B, ICES-B, ENERGY STAR®
Power saving	On	25W (Typical) (blue LED)
modes	Off	<0.5W

Preset Timing Mode (pre-adjusted to VESA® 1600 x 900 @ 60 Hz)

Warning: Do not set the graphics card in your computer to exceed these refresh rates; doing so may result in permanent damage to the LCD display.

1Macintosh computers older than G3 require a ViewSonic® Macintosh adapter. To order an adapter, contact ViewSonic.