ViewSonic VOT120 25
Chapter 5 FAQ & Troubleshooting Frequently asked questions
Q1: How to change Boot device from HDD to other bootable devices?
A1: When seeing POST message, press “F11” to load BBS table then to select the
bootable device you plugged in.
Q2: How to use the e-SATA device in VOT120?
A2: the e-SATA connector for the VOT120 does not support a hot plug devic e, you
have to plug it in before you boot the system. Please note if you’re using 3.5” HDD,
please provide extra power input for the HDD.
Q3: How to set the WOL (Wake on LAN) function?
A3: The WOL function is the default support for the VOT120 so you do not have to do
any modification setting in VOT120 BIOS.
Q4: How much current is provided from the VOT120 USB ports?
A4: 500mA