![](/images/new-backgrounds/1127371/12737115x1.webp)
Place the TV on a solid surface
1.Ensure that the TV is placed in a position to allow free flow of air. Do not cover the ventilation openings on the back cover.
2.Leave at least 15cm around the TV set. Otherwise,
3.Never place the TV set in hot, oily humid or excessively dusty places.
4.To prevent any unsafe situations, no naked flame sources, such as lighted candles, should be placed on or in the vicinity.
5.Avoid heat, direct sunlight and exposure to rain or water. The equipment shall not be exposed to dripping or splashing.
ENGLISH
Install the wall mount plate to the LCD TV
1.Please refer page 24 to understand wall mount dimension.
2.If the TV set is to be installed on a wall, have the installation carried out by qualified service personnel. Improper installation may render the TV set unsafe..
3.Mount the wall mount bracket to the wall ensuring use of proper screws to support the installation. Ensure there is at least 6 cm of space surrounding any
4.Before mounting your TV on the wall, you need to remove the base and connect all of the input source from the rear I/O.
Connecting the power
1.This TV set is designed to operate on a
2.Do not use a poor fitting mains socket. Insert the plug fully into the mains socket. A poor fit may cause arcing and result in a fire. Contact your electrician to have the mains socket changed.
3.The TV set is not disconnected from the mains when the TV set is switched off. To disconnect the TV set completely, pull the plug from the mains. However, some TV sets may have features which need the TV set to be left in standby to work correctly. The instructions in this manual will inform you if this applies.
4.If you will not be using the TV set for several days, the TV set should be disconnected from the mains for environmental and safety reasons.
ViewSonic | 6 | N3290w/N4290p/N4790p |