Allow user to swap input source in PIP or POP image.
Function
Allow user to define a short cut key on the remote control, and the function item is selected in OSD menu.
Network
Wired LAN
Allow you to configure the wired LAN settings.
Status: Display the projector’s status.
DHCP: Abbreviation for Dynamic Host Configuration Protocol. This protocol automatically assigns IP Address to networked devices.
When the “DHCP” sets to “Yes”, it takes some time to obtain IP address from DHCP server.
When the "DHCP" sets to "No", that means user will set IP address by manually.
IP Address: Numerical address to identify networked computers. This function can only be used when DHCP is set to No.
The IP Address is the number that identifies this projector on the network. You cannot have two devices with the same IP Address on the same network.
The IP Address “0.0.0.0” is prohibited.
Subnet Mask: A numeric value to define the number of bits used for a network address of a divided network (or subnet) in an IP Address. This function can only be used when DHCP is set to No.
The Subnet Mask “0.0.0.0” is prohibited.
Default Gateway: A server (or router) to communicate across networks (subnets) that are divided by Subnet Mask. This function can only be used when DHCP is set to No.
DNS: Setup DNS server address when DHCP is disable.
Apply: Save and execute the wired LAN settings.
Wirless LAN
Allow you to configure the wireless LAN settings.
Status: Display the projector’s status.
SSID: Display the projector’s SSID information.
SSID Display: Select if you want to display the projector’s SSID.
Connection Mode: Methods for connecting to wireless networks with
AP: The projector is cabled to the wired network to allow other wireless clients access to. The projector also supports a network control or web
ViewSonic Pro8400 | 33 |
