Setting Date /Time / Alarm
When you power on your photo frame for the first time, you are recommended to adjust the time and language settings.To set date/time, you can press the MENU
button ( 
) to go to the main menu. Move the Menu Navigation ( 
) up/down/ left/right to choose Date/Time and
press 
to confirm.
You can:
●move the Menu Navigation ( 
) left/right to toggle analog/digital clock
● move the Menu Navigation ( | ) Calendar with analog clock Calendar with digital clock |
up/down to toggle calendar on/off |
|
●To adjust date, time and alarm:
1)Press the MENU button ( 
) for about 2 seconds. The clock will turn into digital format and a highlight box will appear.
2)Move the Menu Navigation ( 
) up or down to adjust value. Move the Menu Navigation ( 
) left or right to shift between items.
3)Continue to move the Menu Navigation ( 
) left or right until the alarm icon is selected. Move the Menu Navigation ( 
) up or down to toggle on (highlighted) or off (gray out).
Note: The alarm function is set to off every time the photo frame is powered on. However, the configuration of the alarm will be saved.
4)When all settings are completed, press the MENU button ( 
) for about two seconds to exit. (Or just let the photo frame stay idle for a few seconds and the highlight box will disappear.)
● About wake-up alarm
When the clock reaches the set time and the alarm starts beeping, you can:
1)Press 
to turn off the alarm.
2)If you press any other button, the alarm will stop beeping for 5 minutes. After 5 minutes, the alarm will start beeping again. This snooze function allows you to catch a bit more sleep and it can launch twice (for a total of 10 minutes).
3)If the alarm beeps for 1 minute and no button is pressed, the alarm will enter snooze function mode.
Note: The alarm volume is not adjustable.
ViewSonic | 11 |
